header

Publications@Thapar

Thapar University
Patiala, Punjab - 147004

Publication@Thapar
Saroj Kumar Mohapatra
Professor, Mechanical Engineering
Thapar University Patiala.

Contact Information:
skmohapatra@thapar.edu

Publications with Thapar University Affiliation by Saroj Kumar Mohapatra

2017 (3)2016 (13)2015 (7)2014 (3)2013 (5)2012 (3)
2011 (6)2010 (3)2009 (1)2008 (7)2007 (3)All

Journal Publication(s):
  1. Yogender Pal Chandra, Arashdeep Singh, Saroj Kumar Mohapatra, J.P. Kesari, Lokesh Rana (2017) Numerical optimization and convective thermal loss analysis of improved solar parabolic trough collector receiver system with one sided thermal insulation. Solar Energy, Vol. 148 Iss. pp. 36-48. [IF2015: 4.018]
  2. Jashanpreet Singh, Mandeep Kumar, Satish Kumar, Saroj Kumar Mohapatra (2017) Properties of glass fibre hybrid composites: A Review. Polymer-Plastics Technology and Engineering, Vol. 56 Iss. 5 pp. 455-469. [IF2015: 1.232 ]
  3. Jashanpreet Singh, Mandeep Kumar, Satish Kumar, Saroj Kumar Mohapatra (2017) Properties of Glass-Fiber Hybrid Composites : A Review. Polymer-Plastics Technology and Engineering, Vol. Iss. pp. 455-469. [IF2015: 1.232 ]
  4. Harmanpreet Singh, Saroj Kumar Mohapatra (2016) Production of producer gas from sugarcane bagasse and carpentry waste and its sustainable use in a dual fuel CI engine: A performance, emission, and noise investigation. Journal of the Energy Institute, Vol. Iss. pp. -. [IF2015: 3.204 ]
  5. Nitin Kumar, S.S. Ragit, Saroj Kumar Mohapatra (2016) Safflower Oil Methyl Ester: Optimization of Transesterification Process and Fuel Characterization for C.I. Engine Performance. Global Journal of Engineering Science and Research Management, Vol. 3 Iss. pp. 108-112
  6. Puneet Juneja, Satish Kumar, Saroj Kumar Mohapatra (2016) Influence Of Chemical Leaching On Rheology And Ash Reduction Of Indian Coal. International Journal of Coal Preparation and Utilization, Vol. Iss. pp. -. [IF2015: 0.673 ]
  7. Satish Kumar, Gurprit Singh, Saroj Kumar Mohapatra (2016) An assessment of the physical, mineral, and rheological properties of fly ash for stowing in coal mines. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, Vol. 38 Iss. 20 pp. 2955-2962. [IF2015: 0.527]
  8. Ashish Malik, Saroj Kumar Mohapatra (2016) Power generation using cotton stalk-derived producer gas in diesel engines. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, Vol. 38 Iss. 19 pp. 2816-2822. [IF2015: 0.527]
  9. Satish Kumar, ManiKanwar Singh, Saroj Kumar Mohapatra (2016) Comprehensive characterization of Indian bottom ash: Assessment of its potential utilization. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, Vol. 38 Iss. 18 pp. 2704-2710. [IF2015: 0.527]
  10. Vikas Kannojiya, Satish Kumar, Mani Kanwar, Saroj Kumar Mohapatra (2016) Simulation of erosion wear in slurry pipe line using CFD. Mechanical Engineering Design, Vol. 852 Iss. pp. 459-465
  11. Rajeev Kamal Sharma, Saroj Kumar Mohapatra (2016) Thermo-economic analysis of a biomass-fired bubbling fluidised bed thermal power plant. International Journal of Exergy, Vol. 21 Iss. 1 pp. -. [IF2015: 0.913 ]
  12. Harmanpreet Singh, Saroj Kumar Mohapatra, Mandeep Singh Kaler (2016) Investigation of Performance and Emission Characteristics of a Dual Fuel Compression Ignition Engine Using Sugarcane Bagasse and Carpentry Waste – Producer Gas as an Induced Fuel. Journal of Energy Research and Environmental Technology, Vol. 3 Iss. 2 pp. 115-120
  13. Mandeep Singh Kaler, Saroj Kumar Mohapatra, Harmanpreet Singh (2016) Novel Investigation of Combustion and Noise Characteristics of Biomass Derived Producer Gas Fired Modified Dual Fuel Compression Ignition Engine. Journal of Energy Research and Environmental Technology, Vol. 3 Iss. 2 pp. 121-126
  14. Gurprit Singh, Satish Kumar, Mani Kanwar Singh, Saroj Kumar Mohapatra (2016) Environmental impact assessment of ash disposal system of a thermal power plant. International Journal of Hydrogen Energy, Vol. Iss. pp. -. [IF2015: 3.582 ]
  15. Satish Kumar, B. K. Gandhi, Saroj Kumar Mohapatra (2016) Leaching characteristics of bottom ash from thermal power plants. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, Vol. 38 Iss. 5 pp. 686-694. [IF2015: 0.527]
  16. Mohit Vasdeva, Sumeet Sharma, Saroj Kumar Mohapatra, Krishnendu Kundu (2016) Performance and exhaust emission characteristics of variable compression ratio diesel engine fuelled with esters of crude rice bran oil. SpringerPlus, Vol. Iss. pp. -. [IF2015: 1.13]
  17. Gurprit Singh, Satish Kumar, Saroj Kumar Mohapatra (2015) Erosion wear analysis of slurry piping materials using Taguchi technique. International Journal of Applied Engineering Research, Vol. 10 Iss. 78 Special Issue pp. 136-139
  18. Sandeep Singh, Sumeet Sharma, Saroj Kumar Mohapatra (2015) A production of biodiesel from waste cotton seed oil and testing on small capacity diesel engine. International Journal of Advance Research In Science And Engineering, Vol. 4 Iss. s2 pp. 172-178
  19. Pramod Kumar, Lakshya Garg, Rohit Kumar, Saroj Kumar Mohapatra (2015) Performance Parameters of Dual Fuel Diesel Engine using Eucalyptus – Producer Gas as Secondary Fuel. International Journal of Engineering Technology Science and Research, Vol. 2 Iss. S1 pp. 15-22
  20. Rajeev Kamal Sharma, Saroj Kumar Mohapatra (2015) Study of particle size distribution and oxygen mass balance in a bubbling fluidizing combustor using cotton stalk. Asia-Pacific Journal of Chemical Engineering, Vol. Iss. pp. -. [IF2015: 0.836 ]
  21. H. Kumar, Saroj Kumar Mohapatra, R. I. Singh (2015) Three-dimensional CFD modelling of a fluidised bed combustor fuelled by biomass and coal. Materials Research Innovations, Vol. 19 Iss. 8 pp. 8-124. [IF2015: 0.83]
  22. H. Kumar, Saroj Kumar Mohapatra, R.I. Singh (2015) Study of a 30 MW bubbling fluidized bed combustor based on co-firing biomass and coal. Sadhana-Academy Proceedings in Engineering Sciences, Vol. Iss. pp. -. [IF2015: 0.465]
  23. Satish Kumar, B.K. Gandhi, Saroj Kumar Mohapatra (2014) Performance Characteristics of Centrifugal Slurry Pump with Multi-Sized Particulate Bottom and Fly Ash Mixtures. Particulate Science and Technology, Vol. 32 Iss. pp. 466-476. [IF2015: 0.784]
  24. Satishchandra Ragit, Saroj Kumar Mohapatra, Krishnendu Kundu (2014) Comparative Studies on Performance Characteristics of CI Engine Fuelled with Neem Methyl Ester and Mahua Methyl Ester and Its Respective Blends with Diesel Fuel. Journal of Environmental Science and Engineering, Vol. 56 Iss. 1 pp. 73-78
  25. Arunanshu Chakravarthy, Satish Kumar, Saroj Kumar Mohapatra (2014) Transportation Performance of Highly Concentrated Coal-Water Slurries Prepared from Indian Coals. Applied Mechanics and Materials, Vol. 592-594 Iss. pp. 869-873
  26. Sandeep Singh, Sumeet Sharma, Saroj Kumar Mohapatra, K. Kundu (2013) Characterisation of Biodiesel Derived From Waste Cotton Seed Oil and Waste Mustard Oil. Asian Journal of Engineering and Applied Technology, Vol. 2 Iss. 2 pp. 73-77
  27. V. Sitaram Prasad, Saroj Kumar Mohapatra, Pooja Iyer M. (2013) Exhaust gas emission revelation during the study of performance of Pongamia oil as biodiesel. International Journal of Engineering Research & Technology, Vol. 2 Iss. 8 pp. 993-997
  28. Ashish Malik, Saroj Kumar Mohapatra (2013) Biomass-based gasifiers for internal combustion (IC) engines-A review. Sadhana-Academy Proceedings in Engineering Sciences, Vol. 38 Iss. 3 pp. 461-476. [IF2015: 0.465]
  29. Kumar S., Saroj Kumar Mohapatra, Gandhi B.K. (2013) Effect of addition of fly ash and drag reducing on the rheological properties of bottom ash. International Journal of Mechanical and Materials Engineering, Vol. 8 Iss. 1 pp. 1-8
  30. Kumar S., Saroj Kumar Mohapatra, Gandhi B.K. (2013) Investigation on centrifugal slurry pump performance with variation of operating speed. International Journal of Mechanical and Materials Engineering, Vol. 8 Iss. 1 pp. 40-47
  31. S.S. Ragit, Saroj Kumar Mohapatra, Prashant Gill, K. Kundu (2012) Brown hemp methyl transesterification process and evaluation of fuel properties. Biomass and Bioenergy, Vol. 41 Iss. June pp. 14-20
  32. Ragit S.S., Saroj Kumar Mohapatra, Gill P., Kundu K. (2012) Brown hemp methyl ester: Transesterification process and evaluation of fuel properties. Biomass & Bioenergy, Vol. 41 Iss. pp. 14-20. [IF2015: 3.219]
  33. Sehgal S.S., Murugesan K., Saroj Kumar Mohapatra (2012) Effect of channel and plenum aspect ratios on the performance of microchannel heat sink under different flow arrangements. Journal of Mechanical Science and Technology, Vol. 26 Iss. 9 pp. 2985-2994
  34. S.S. Ragit, Saroj Kumar Mohapatra, K. Kundu, Prashant Gill (2011) Optimization of neem methyl ester from transesterification process and fuel characterization as a diesel substitute. Biomass and Bioenergy, Vol. 35 Iss. 3 pp. 1138-1144
  35. Ravi Inder Singh, Saroj Kumar Mohapatra, Gangacharyulu Dasaroju (2011) Fluidised bed combustion and gasification of rice husk and rice straw: A state of the art review. International Journal of Renewable Energy Technology, Vol. 2 Iss. 4 pp. 345-372
  36. Ravi Inder Singh, Saroj Kumar Mohapatra, Gangacharyulu Dasaroju (2011) Study of agglomeration in 3.5 MW AFBC using rice husk particles. International Journal of Renewable Energy Technology, Vol. 2 Iss. 2 pp. 120-142
  37. S.S. Ragit, Saroj Kumar Mohapatra, K. Kundu, Prashant Gill (2011) Optimisation of neem methyl ester from transesterification process and fuel characterization as a diesel substitute. Biomass & Bioenergy, Vol. 35 Iss. 3 pp. 1138-1144. [IF2015: 3.219]
  38. Ragit S.S., Saroj Kumar Mohapatra, Kundu K. (2011) Comparative study of engine performance and exhaust emission characteristics of a single cylinder 4-stroke CI engine operated on the esters of hemp oil and neem oil. Indian Journal of Engineering and Materials Sciences, Vol. 18 Iss. 3 pp. 204-210. [IF2015: 0.485]
  39. Sehgal S.S., Murugesan K., Saroj Kumar Mohapatra (2011) Experimental investigation of the effect of flow arrangements on the performance of a micro-channel heat sink. Experimental Heat Transfer, Vol. 24 Iss. 3 pp. 215-233. [IF2015: 1.522]
  40. Phull Gurlovleen Singh, Satish kumar, Saroj Kumar Mohapatra (2010) Modelling and stress simulation of centrifugal compressor. International Journal of Advances in Thermal Sciences and Engineering, Vol. 1 Iss. 1 pp. 99-106
  41. Ragit S.S., Saroj Kumar Mohapatra, Kundu K. (2010) Performance and emission evaluation of a diesel engine fueled with methyl ester of neem oil and filtered neem oil. Journal of Scientific & Industrial Research, Vol. 69 Iss. 1 pp. 62-66. [IF2015: 0.557]
  42. Kumar J., Khamba J.S., Saroj Kumar Mohapatra (2009) Investigating and modeling tool-wear rate in the ultrasonic machining of titanium. International Journal of Advanced Manufacturing Technology, Vol. 41 Iss. 42349 pp. 1107-1117. [IF2015: 2.209 ]
  43. Saroj Kumar Mohapatra, Ravinder Singh (2008) Study of Some Performance Parameters of an Atmospheric Bubbling Fluidized Bed Boiler Based on Coal Washery Rejects Considering Bubble Growth along Bed Height. Journal of Solid Waste Technology and Management, Vol. 34 Iss. 4 pp. 213-224
  44. Jatinder Kumar, J.S. Khamba, Saroj Kumar Mohapatra (2008) An investigation into the machining characteristics of titanium using ultrasonic machining. International Journal of Machining and Machinability of Materials, Vol. 2 Iss. 1-2 pp. 143-161
  45. Jatinder Kumar, J.S. Khamba, Saroj Kumar Mohapatra (2008) An experimental investigation of the influence of work material properties on performance indices of ultrasonic machining. Journal of Manufacturing Technology Today, Vol. 7 Iss. 3 pp. 23-27
  46. Jatinder Kumar, J.S. Khamba, Saroj Kumar Mohapatra (2008) Surface quality evaluation in ultrasonic machining of titanium using Taguchi method. International Journal of Manufacturing Technology and Research, Vol. 4 Iss. 1-2 pp. -
  47. Ravi Inder Singh, Saroj Kumar Mohapatra, Gangacharyulu Dasaroju (2008) Studies in an atmospheric bubbling fluidized bed combustor of 10 MW power plant based on rice husk. Energy Conversion and Management, Vol. 49 Iss. 11 pp. 3086-3103. [IF2015: 5.589 ]
  48. Saroj Kumar Mohapatra, Singh R.I. (2008) Study of some performance parameters of an atmospheric bubbling fluidized be boiler based on coal washery rejects considering bubble growth along bed height. Journal of Solid Waste Technology and Management, Vol. 34 Iss. 4 pp. 213-224
  49. Singh R.I., Saroj Kumar Mohapatra, Gangacharyulu Dasaroju (2008) Studies in an atmospheric bubbling fluidized-bed combustor of 10 MW power plant based on rice husk. Energy Conversion and Management, Vol. 49 Iss. 11 pp. 3086-3103. [IF2015: 5.589 ]
  50. Ravi Inder Singh, Saroj Kumar Mohapatra, Gangacharyulu Dasaroju (2007) Three Phase Mathematical Modeling of Catalytic Fluidized Bed Reactors Using Bubble Growth Along Bed Height. International Journal of Applied Engineering Research, Vol. 2 Iss. 2 pp. 261-267
  51. Jatinder Kumar, Saroj Kumar Mohapatra, J.S. Khamba (2007) Ultrasonic machining of titanium: A state of the art review. Manufacturing Technology Today, Vol. 3 Iss. 9 pp. 3-9
  52. Ravi Inder Singh, Saroj Kumar Mohapatra, D. Gangacharyulu (2007) Modelling for Exit Gas Composition of A 10 MW Afbc Power Plant Using Rice Husk Particles. International Journal of Applied Engineering Research, Vol. 2 Iss. 2 pp. 261-267

Conference Publication(s):
  1. Hemant Kumar, Saroj Kumar Mohapatra, Ravi Inder Singh (2015) CFD Analysis of a Fluidized Bed Combustor Based on Co-Firing. Proceedings of the International Mechanical Engineering Congress and Exposition [ : November 13–19, 2015], pp.-.
  2. Ravi Inder Singh, Saroj Kumar Mohapatra, D. Gangacharyulu (2010) CFD Analysis of Bubbling Fluidized Bed Using Rice Husk. Proceedings of the International Conference on Fluidized Bed Combustion [20th : : ], pp.857-863.