header

Publications@Thapar

Thapar University
Patiala, Punjab - 147004

Publication@Thapar
Ajay Batish
Professor, Mechanical Engineering
Thapar University Patiala.

Contact Information:
abatish@thapar.edu

Publications with Thapar University Affiliation by Ajay Batish

2017 (1)2016 (5)2015 (6)2014 (7)2013 (7)2012 (7)
2011 (10)2010 (1)2009 (4)2008 (1)All

Journal Publication(s):
  1. Bhullar S.S., Nangia V.K., Ajay Batish (2017) Channels of interaction and past collaborative experience as imperatives in academia?industry collaboration. Technology Analysis and Strategic Management, Vol. Iss. pp. 1-15
  2. Sanjeev Kumar, Ajay Batish, Rupinder Singh, TP Singh (2016) Machining performance of cryogenically treated Ti–5Al–2.5Sn titanium alloy in electric discharge machining: A comparative study. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. Iss. pp. -. [IF2015: 1.015 ]
  3. Garg A., Bhattacharya A., Ajay Batish (2016) Chemical vapor treatment of ABS parts built by FDM: Analysis of surface finish and mechanical strength. International Journal of Advanced Manufacturing Technology, Vol. Iss. pp. 1-17. [IF2015: 2.209 ]
  4. Sarabjeet Singh Sidhu, Sanjeev Kumar, Ajay Batish (2016) Metal Matrix Composites for Thermal Management: A Review. Critical Reviews in Solid State and Materials Sciences, Vol. 41 Iss. 2 pp. 132-157. [IF2015: 6.455]
  5. Duvedi R.K., Bedi S., Ajay Batish, Mann S. (2016) The edge?torus tangency problem in multipoint machining of triangulated surface models. International Journal of Advanced Manufacturing Technology, Vol. 82 Iss. 12-Sep pp. 1959-1972. [IF2015: 2.209 ]
  6. Ashu Garg, Anirban Bhattacharya, Ajay Batish (2016) On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment. Materials and Manufacturing Processes, Vol. 31 Iss. 4 pp. 522-529. [IF2015: 2.274]
  7. Sanjeev Kumar, Rupinder Singh, Ajay Batish, T.P. Singh (2015) Study the surface characteristics of cryogenically treated tool- electrodes in powder mixed electric discharge machining process. Materials Science Forum, Vol. 808 Iss. pp. 19-33. [IF2015: 0.33]
  8. Sidhu S.S., Ajay Batish, Kumar S. (2015) Analysis of residual stresses in particulate reinforced aluminium matrix composite after EDM. Materials Science and Technology (United Kingdom), Vol. 31 Iss. 15 pp. 1850-1859. [IF2015: 1.538 ]
  9. Bhatt G., Ajay Batish, Bhattacharya A. (2015) Experimental investigation of magnetic field assisted powder mixed electric discharge machining. Particulate Science and Technology, Vol. 33 Iss. 3 pp. 246-256. [IF2015: 0.784]
  10. Duvedi R.K., Bedi S., Ajay Batish, Mann S. (2015) Numeric implementation of drop and tilt method of 5-axis tool positioning for machining of triangulated surfaces. International Journal of Advanced Manufacturing Technology, Vol. Iss. pp. -. [IF2015: 2.209 ]
  11. Ajay Batish, Anirban Bhattacharya, Neeraj Kumar (2015) Powder mixed dielectric: An approach for improved process performance in EDM. Particulate Science and Technology, Vol. 33 Iss. 2 pp. 150-158. [IF2015: 0.784]
  12. Singh R.P., Ajay Batish, Singh T.P. (2014) Determining safe limits for significant task parameters during manual lifting. Workplace Health & Safety, Vol. 62 Iss. 4 pp. 150-160. [IF2015: 0.697]
  13. Singh R.P., Ajay Batish, Singh T.P., Anirban Bhattacharya (2014) An experimental study to evaluate the effect of ambient temperature during manual lifting and design of optimal task parameters. Human Factors and Ergonomics In Manufacturing, Vol. 24 Iss. 1 pp. 54-70. [IF2015: 0.761]
  14. Gupta A., Ramagopal S.V., Ajay Batish, Anirban Bhattacharya (2014) Surface roughness and profile error in precision diamond turning of C18000. Materials and Manufacturing Processes, Vol. 29 Iss. 5 pp. 606-613. [IF2015: 2.274]
  15. Duvedi R.K., Bedi S., Ajay Batish, Mann S. (2014) A multipoint method for 5-axis machining of triangulated surface models. CAD Computer Aided Design, Vol. 52 Iss. pp. 17-26
  16. Singh H., Anirban Bhattacharya, Ajay Batish (2014) Finite element modeling and analysis of powder mixed electric discharge machining process for temperature distribution and volume removal considering multiple craters. International Journal of Modeling, Simulation, and Scientific Computing, Vol. 5 Iss. 3 pp. -
  17. Kumar S., Ajay Batish, Singh R., Singh T.P. (2014) A hybrid Taguchi-artificial neural network approach to predict surface roughness during electric discharge machining of titanium alloys. Journal of Mechanical Science and Technology, Vol. 28 Iss. 7 pp. 2831-2844
  18. Sidhu S.S., Ajay Batish, Kumar S. (2014) Study of surface properties in particulate-reinforced metal matrix composites (MMCs) using powder-mixed electrical discharge machining (EDM). Materials and Manufacturing Processes, Vol. 29 Iss. 1 pp. 46-52. [IF2015: 2.274]
  19. Sidhu S.S., Kumar S., Ajay Batish (2013) Electric discharge machining of 10vol% AL2O3/AL metal matrix composite - An experimental study. Materials Science Forum, Vol. 751 Iss. pp. 9-19. [IF2015: 0.33]
  20. Anirban Bhattacharya, Ajay Batish (2013) Predictor equations for estimating crater dimensions in PMEDM process using fem simulation and experimental validation. Materials Science Forum, Vol. 751 Iss. pp. 45-60. [IF2015: 0.33]
  21. Anirban Bhattacharya, Ajay Batish, Neeraj Kumar (2013) Surface characterization and material migration during surface modification of die steels with silicon, graphite and tungsten powder in EDM process. Journal of Mechanical Science and Technology, Vol. 27 Iss. 1 pp. 133-140
  22. Sidhu S.S., Ajay Batish, Kumar S. (2013) EDM of metal matrix composite for parameter design using lexicographic goal programming. Materials and Manufacturing Processes, Vol. 28 Iss. 4 pp. 495-500. [IF2015: 2.274]
  23. Sidhu S.S., Ajay Batish, Kumar S. (2013) Fabrication and electrical discharge machining of metal-matrix composites: A review. Journal of Reinforced Plastics and Composites, Vol. 32 Iss. 17 pp. 1310-1320. [IF2015: 1.086 ]
  24. Sidhu S.S., Ajay Batish, Kumar S. (2013) Neural network-based modeling to predict residual stresses during electric discharge machining of Al/SiC metal matrix composites. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, Vol. 227 Iss. 11 pp. 1679-1692. [IF2015: 1.366 ]
  25. Kumar S., Singh R., Ajay Batish, Singh T.P. (2012) Electric discharge machining of titanium and its alloys: A review. International Journal of Machining and Machinability of Materials, Vol. 11 Iss. 1 pp. 84-111
  26. Anirban Bhattacharya, Ajay Batish, Singh K. (2012) FE simulation and experimental validation of powder mixed EDM process for estimating the temperature distribution and volume removed in single crater. International Journal of Modeling, Simulation, and Scientific Computing, Vol. 3 Iss. 2 pp. -
  27. Anirban Bhattacharya, Ajay Batish (2012) Effect of process variables on microhardness, grain size and strain during machining of various die steels with powder-mixed electric-discharge machining using dummy treated experimental design. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, Vol. 226 Iss. 7 pp. 1192-1204. [IF2015: 1.366 ]
  28. Anirban Bhattacharya, Ajay Batish, Singh G., Singla V.K. (2012) Optimal parameter settings for rough and finish machining of die steels in powder-mixed EDM. International Journal of Advanced Manufacturing Technology, Vol. 61 Iss. 42221 pp. 537-548. [IF2015: 2.209 ]
  29. Anirban Bhattacharya, Ajay Batish, Singh M. (2012) Experimental studies to validate simulated results for nozzle effectiveness using multi-response optimisation during cylindrical grinding process. International Journal of Materials Engineering Innovation, Vol. 3 Iss. 42097 pp. 165-189
  30. Gaurav Kumar Dhuria, Rupinder Singh, Ajay Batish (2011) Ultrasonic machining of titanium: A state of the art review. International Journal of Machining and Machinability of Materials, Vol. 10 Iss. 4 pp. 326-355
  31. Anirban Bhattacharya, Ajay Batish, Singh G. (2011) Surface modification of High Carbon High Chromium, EN31 and Hot die steel using powder mixed EDM process. Materials Science Forum, Vol. 701 Iss. pp. 43-59. [IF2015: 0.33]
  32. Ajay Batish, Anirban Bhattacharya (2011) Mechanism of material deposition from powder, electrode and dielectric for surface modification of H11and H13 die steels in EDM process. Materials Science Forum, Vol. 701 Iss. pp. 61-75. [IF2015: 0.33]
  33. Ajay Batish, Anirban Bhattacharya, Singh B. (2011) Multi-response optimization and empirical modeling of cardiopulmonary responses during manual lifting tasks. Human Factors and Ergonomics In Manufacturing, Vol. 21 Iss. 1 pp. 29-43. [IF2015: 0.761]
  34. Kumar P., Ajay Batish, Anirban Bhattacharya, Duvedi R.K. (2011) Effect of process parameters on microhardness and microstructure of heat affected zone in submerged arc welding. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, Vol. 225 Iss. 5 pp. 711-721. [IF2015: 1.366 ]
  35. Kim J.-M., Seo J., Ajay Batish, Anirban Bhattacharya (2011) Effect of parameters in resistance micro-welding of stainless steel cross wire using fractional factorial experimental design. International Journal of Manufacturing Research, Vol. 6 Iss. 3 pp. 290-303
  36. Kumar L., Ajay Batish, Anirban Bhattacharya (2011) Multi-response optimization of process parameters in cold chamber pressure die casting. Journal of the Institution of Engineers (India), Part PR: Production Engineering Division, Vol. 92 Iss. SEPT pp. 19-24
  37. Dhuria G.K., Singh R., Ajay Batish (2011) Ultrasonic machining of titanium and its alloys: A state of art review and future prospective. International Journal of Machining and Machinability of Materials, Vol. 10 Iss. 4 pp. 326-355
  38. Anirban Bhattacharya, Ajay Batish (2011) Effect of parameters on predicted Stresses during Single Point Incremental Forming. International Journal of Applied Engineering Research, Vol. 6 Iss. 4 pp. 533-544
  39. Ajay Batish, Anirban Bhattacharya, Maddamsetty P. (2010) Fractional factorial analysis of lifting and carrying tasks on postural score to investigate the effect of contributing parameters and their interactions. International Journal of Industrial and Systems Engineering, Vol. 6 Iss. 3 pp. 301-320
  40. Anirban Bhattacharya, Das S., Majumder P., Ajay Batish (2009) Estimating the effect of cutting parameters on surface finish and power consumption during high speed machining of AISI 1045 steel using Taguchi design and ANOVA. Production Engineering, Vol. 3 Iss. 1 pp. 31-40
  41. Patel K., Ajay Batish, Anirban Bhattacharya (2009) Optimization of surface roughness in an end-milling operation using nested experimental design. Production Engineering, Vol. 3 Iss. 42128 pp. 361-373
  42. Ajay Batish, Singh T.P. (2008) MHAC - An assessment tool for analysing manual material handling tasks. International Journal of Occupational Safety and Ergonomics, Vol. 14 Iss. 2 pp. 223-235

Conference Publication(s):
  1. Bhatt G., Ajay Batish, Bhattacharya A. (2015) Experimental investigation of magnetic field assisted powder mixed electric discharge machining. Proceedings of the Particulate Science and Technology [ : ], pp.246-256.
  2. Sidhu S.,S., Ajay Batish, Kumar S. (2013) Neural network-based modeling to predict residual stresses during electric discharge machining of Al/SiC metal matrix composites. Proceedings of the Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture [ : ], pp.1679-1692.
  3. Bhattacharya A., Ajay Batish, Singh G. (2012) Optimization of powder mixed electric discharge machining using dummy treated experimental design with analytic hierarchy process. Proceedings of the Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture [ : ], pp.103-116.
  4. Ajay Batish, Bhattacharya A., Singla V.,K., Singh G. (2012) Study of material transfer mechanism in die steels using powder mixed electric discharge machining. Proceedings of the Materials and Manufacturing Processes [ : ], pp.449-456.
  5. Singh R.,P., Ajay Batish, Singh T.,P. (2011) Analyzing S/N ratio optimization of physiological stress of Indian male workers in summer & winter during manual lifting tasks. Proceedings of the Contemporary Ergonomics and Human Factors 2011 [Lincolnshire : 1 April 2011 through 1 April 2011], pp.270-277.
  6. Jadeja S.,B., Khandare S.,S., Ajay Batish, Patel D. (2009) Integrating lean manufacturing and six sigma by means of axiomatic design principles. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Proceedings [Boston, MA : 31 October 2008 through 6 November 2008], pp.449-455.
  7. Jadeja S.,B., Khandare S.,S., Ajay Batish (2009) Implementation of JIT methodology through axiomatic design approach. Proceedings of the Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009 [Osaka : 2 December 2009 through 4 December 2009], pp.-.