header

Publications@Thapar

Thapar University
Patiala, Punjab - 147004

Publication@Thapar
Tarun Nanda
Assistant Professor, Mechanical Engineering
Thapar University Patiala.

Contact Information:
tarunnanda@thapar.edu
9463586083, +91-175-2393106

Publications with Thapar University Affiliation by Tarun Nanda

2017 (3)2016 (8)2015 (3)2014 (1)2013 (1)2011 (2)
2010 (1)2009 (9)2008 (2)2006 (1)2005 (1)2004 (1)
2003 (1)All

Journal Publication(s):
  1. Karanbir Singh, Tarun Nanda, Rajeev Mehta (2017) Compatibilization of polypropylene fibers in epoxy based GFRP/clay nanocomposites for improved impact strength. Composites Part A: Applied Science and Manufacturing, Vol. Iss. pp. -
  2. Karanbir Singh, Tarun Nanda, Rajeev Mehta (2017) Processing of poly-ethylene terephthalate fiber reinforcement to improve compatibility with constituents of GFRP nanocomposites . Materials and Manufacturing Processes, Vol. Iss. pp. -. [IF2015: 2.274]
  3. Mittal M., Tarun Nanda, Kumar B.R., Singh V. (2017) Effect of inter-critical annealing parameters on ferrite recrystallization and austenite formation in DP 590 steel. Materials and Manufacturing Processes, Vol. Iss. pp. 1-8. [IF2015: 2.274]
  4. Mayank Mittal, Tarun Nanda, B. Ravi Kumar, and Vishal Singh (2016) Effect of inter- critical annealing parameters on ferrite recrystallization and austenite formation in DP 590 steel . Materials and Manufacturing Processes, Vol. Iss. pp. -. [IF2015: 2.274]
  5. Arnab Chakraborty, Manashi Adhikary, T. Venugopalan, Virender Singh, Tarun Nanda, B. Ravi Kumar (2016) Effect of ferrite-martensite interface morphology on bake hardening response of DP590 steel. Materials Science & Engineering A , Vol. 676 Iss. pp. 463-473. [IF2015: 2.647]
  6. Tarun Nanda, B. Ravi Kumar, and Vishal Singh (2016) A thermal cycling route for processing nano-grains in AISI 316L stainless steel for improved tensile deformation behaviour . Defence Science Journal, Vol. 66 Iss. 5 pp. 529-535. [IF2015: 0.5]
  7. Surinder Singh, Tarun Nanda, B. Ravi Kumar, Vishal Singh (2016) Controlled Phase Transformation Simulations to Design Microstructure for Tailored Mechanical Properties in Steel . Materials and Manufacturing Processes, Vol. 31 Iss. 15 pp. 2064-2075. [IF2015: 2.274]
  8. Tarun Nanda, Vishal Singh, Virender Singh, Sandeep Sharma, Arnab Chakraborty (2016) Third generation of advanced high strength steels: processing routes and properties . Journal of Materials: Design and Applications , Vol. Iss. pp. -. [IF2015: 0.793]
  9. Tarun Nanda, B. Ravi Kumar, Sailaja Sharma, Vishal Singh, & O.P. Pandey (2016) Effect of Thermal Cycling Process Parameters on Recrystallization Kinetics for Processing of Fine Grained Pure Copper. Materials and Manufacturing Processes, Vol. 32 Iss. 1 pp. 34-43. [IF2015: 2.274]
  10. Tarun Nanda, B. Ravi Kumar, Jasdeep (2016) Effect of isothermal annealing on microstructural morphology of martensite in a super martensitic stainless steel subjected to different prior conditions. Materials and Manufacturing Processes, Vol. 31 Iss. 8 pp. 995-1003. [IF2015: 2.274]
  11. Sharma S., Tarun Nanda, Adhikary M., Venugopalan T., Kumar B.R. (2016) A simulation study of pearlite-to-austenite transformation kinetics in rapidly heated hot-rolled low carbon steel. Materials & Design, Vol. 107 Iss. pp. 65-73. [IF2015: 4.364]
  12. Tarun Nanda (2015) A quantitative analysis of the relationship between drivers of innovativeness and performance of MSMEs. Int. J. Technology, Policy and Management, Vol. 15 Iss. 2 pp. 128-157
  13. Singh D., Khamba J.S., Tarun Nanda (2015) Exploring the determinants of technology innovation in MSMEs. International Journal of Engineering Research in Africa, Vol. 13 Iss. pp. 103-115
  14. Tarun Nanda, Kumar B.R., Bhinder J. (2015) Effect of Isothermal Annealing on Microstructural Morphology of Martensite in a Super-Martensitic Stainless Steel Subjected to Different Prior Conditions. Materials and Manufacturing Processes, Vol. Iss. pp. -. [IF2015: 2.274]
  15. Davinder Singh, Jaimal Singh Khamba, Tarun Nanda (2014) Factors Contributing Towards Technology Development in Small Firms. International Journal of Mechanical, Industrial Science and Engineering, Vol. 8 Iss. 1 pp. 235-240
  16. Tarun Nanda, Himanshu Gupta, Manjeet Kharub and Navdeep Singh (2013) Diagnostics for pretesting questionnaires: a comparative analysis. Int. Journal of Technology, Policy and Management, Vol. 13 Iss. 1 pp. 67-79
  17. Gopal K Dixit, Tarun Nanda (2011) Strategic Alignment of Organizational Culture Issues for Stimulating Creativity and Innovation. International Journal of Applied Engineering Research, Vol. 6 Iss. 4 pp. 471-480
  18. Dixit G.K., Tarun Nanda (2011) Strategic alignment of organizational culture issues for stimulating creativity and innovation. International Journal of Applied Engineering Research, Vol. 6 Iss. 4 pp. 471-480
  19. Gopal Dixit, Tarun Nanda (2010) Strategic Alignment of Organizational Culture and Climate for Stimulating Innovation in SMEs. International Journal of Innovation, Management and Technology, Vol. 2 Iss. 1 pp. 77-85
  20. Tarun Nanda, Nitin Singla (2009) Effect of welding variables on toughness of mild steel SAW joints under ambient conditions. Manufacturing Technology Today, Vol. 8 Iss. 3 pp. 24-30
  21. Tarun Nanda (2009) ** Stress analysis and optimization of rolling mill housing using CAE. (Best Paper Research Award (N K Iyengar Award by Institution of Engineers, Kolkata). Journal of Institution of Engineers (Mechanical Division), Vol. 89 Iss. pp. 35-42
  22. Tarun Nanda, T.P Singh. (2009) Determinants of creativity and innovation at workplace ? a comprehensive review . International Journal of Technology, Policy and Management, Vol. 9 Iss. 1 pp. 84-106
  23. Tarun Nanda, T.P Singh. (2009) An assessment of the technology innovation initiatives in the Indian small scale manufacturing industry. International Journal of Technology, Policy and Management, Vol. 9 Iss. 2 pp. 173-207
  24. Tarun Nanda, T.P Singh (2009) Strategic Alignment of Technological Innovation Initiatives in Cutting Tool Industry in the Region. International Journal of Technology, Policy and Management, Vol. 9 Iss. 4 pp. 358-386
  25. Jaswinder Singh Saini, Tarun Nanda, Khanna K. (2009) Stress analysis and optimization of rolling mill housing using CAE. Journal of the Institution of Engineers (India): Mechanical Engineering Division, Vol. 89 Iss. JANUARY pp. 35-42
  26. Tarun Nanda, Singh T.P. (2009) Determinants of creativity and innovation in the workplace: A comprehensive review. International Journal of Technology, Policy and Management, Vol. 9 Iss. 1 pp. 84-106
  27. Singh D., Tarun Nanda, Singh T.P. (2009) Strategic alignment of technological innovation initiatives in cutting tool industry in the region. International Journal of Technology, Policy and Management, Vol. 9 Iss. 4 pp. 358-386
  28. Tarun Nanda, Singh T.P. (2009) An assessment of the technology innovation initiatives in the Indian small-scale manufacturing industry. International Journal of Technology, Policy and Management, Vol. 9 Iss. 2 pp. 173-207
  29. Tarun Nanda, T.P Singh (2008) A statistical analysis to evaluate the factors impairing performance of the tool and auto-component industry. Manufacturing Technology Today Journal, Vol. 7 Iss. 10 pp. 31-35
  30. Tarun Nanda, T.P Singh. (2008) A Comprehensive Strategy for Technology Generation through Effective Industry-Institute Bonding. The Indian Journal of Technical Education, Vol. 31 Iss. 2 pp. 1-6
  31. Jaswinder Singh Saini, Garg A., Tarun Nanda, Khanna K. (2006) Internal stress relief feature as a means for gear stress reduction. Journal of the Institution of Engineers (India): Mechanical Engineering Division, Vol. 87 Iss. APR. pp. 33-38
  32. Jaswinder Singh Saini, Garg M.P., Tarun Nanda (2005) Finding the natural frequencies and mode shapes for vibration analysis of upright drilling machine. Journal of the Institution of Engineers (India): Mechanical Engineering Division, Vol. 86 Iss. OCT. pp. 164-171
  33. Jaswinder Singh Saini, Tarun Nanda, Khanna K. (2004) Discretization of a single-point cutting tool in three dimensions. Journal of the Institution of Engineers (India), Part PR: Production Engineering Division, Vol. 84 Iss. MAR. pp. 71-76
  34. I.P.S. Abuja, Tarun Nanda (2003) An Insight into Low Growth of Technical Education in India. The Indian Journal of Technical Education, Vol. 26 Iss. 3 pp. 29-37