header

Publications@Thapar

Thapar University
Patiala, Punjab - 147004

Publication@Thapar
Rajeev Mehta
Professor, Chemical Engineering
Thapar University Patiala.

Contact Information:
rajeev.mehta@thapar.edu

Publications with Thapar University Affiliation by Rajeev Mehta

2017 (10)2016 (15)2015 (9)2014 (5)2013 (4)2012 (6)
2011 (6)2007 (2)2005 (1)2003 (2)All

Book Chapter Publication(s):
  1. P. Singla, Rajeev Mehta, S. N. Upadhyay Polylactic Acid (PLA): Microwave Assisted Synthesis in Encyclopedia of Biomedical Polymers and Polymeric Biomaterials edited by Munmaya Mishra, UK, CRC Press, 2015. [ISBN : 9781439898796]

  2. Rajeev Mehta, P. Singla, V. Kumar, S. N. Upadhyay Synthesis of poly(lactic acid): a review in Encyclopedia of Biomedical Polymers and Polymeric Biomaterials edited by , UK, CRC Press, 2015. [ISBN : 9781439898796]


Journal Publication(s):
  1. Narang S., Rajeev Mehta, Upadhyay S.N. (2017) Solvent-free cycloaddition of CO2 and propylene oxide to cyclic carbonates using different ligand metal complexes. Inorganic and Nano-Metal Chemistry, Vol. 47 Iss. 6 pp. 909-916
  2. Singh K., Nanda T., Rajeev Mehta (2017) Processing of polyethylene terephthalate fiber reinforcement to improve compatibility with constituents of GFRP nanocomposites. Materials and Manufacturing Processes, Vol. Iss. pp. 1-9
  3. Garg Mohit, Sharma Shruti, Sharma Sandeep, Rajeev Mehta (2017) Effect of hyrothermal aging on GFRP composites in marine environment. Steel and Composite Structures, Vol. Iss. pp. -. [IF2015: 3.198 ]
  4. Sivakoti Shyam Kumar, Rahul Chhibber, Rajeev Mehta (2017) Synthesis and Evaluation of PEEK Composites used in Scaffold Preparation for Load Bearing Bone Implants. Materials Science Forum, Vol. Iss. Accepted pp. -. [IF2015: 0.33]
  5. Sivakoti Shyam Kumar, Rahul Chhibber, Rajeev Mehta (2017) PEEK Composite Scaffold Preparation for Load Bearing Bone Implants. Materials Science Forum, Vol. Iss. Accepted pp. -. [IF2015: 0.33]
  6. Karanbir Singh, Tarun Nanda, Rajeev Mehta (2017) Compatibilization of polypropylene fibers in epoxy based GFRP/clay nanocomposites for improved impact strength. Composites Part A: Applied Science and Manufacturing, Vol. Iss. pp. -
  7. Karanbir Singh, Tarun Nanda, Rajeev Mehta (2017) Processing of poly-ethylene terephthalate fiber reinforcement to improve compatibility with constituents of GFRP nanocomposites . Materials and Manufacturing Processes, Vol. Iss. pp. -. [IF2015: 2.274]
  8. Shilpa Narang, Rajeev Mehta, S.Nath Upadhyay (2017) Solvent free cycloaddition of CO2 and Propylene Oxide to Cyclic carbonates using different ligand metal complexes. Inorganic and Nano-Metal Chemistry , Vol. 47 Iss. 6 pp. 909-916. [IF2015: 0.493]
  9. Mohit Garg, Shruti Sharma, Rajeev Mehta (2017) Role of curing conditions and silanization of glass fibers on carbon nanotubes (CNTs) reinforced glass fiber epoxy composites. Composite Interfaces, Vol. 24 Iss. 2 pp. 233-353. [IF2015: 1.083]
  10. Bikramjit Sharma, Rahul Chhibber, Rajeev Mehta (2017) Curing studies and mechanical properties of glass fiber reinforced composites based on silanized clay minerals. Applied Clay Science, Vol. Iss. pp. -. [IF2015: 3.101 ]
  11. Narang S., Rajeev Mehta, Berek D., Upadhyay S.N. (2016) Copolymerization of propylene oxide and CO2 using achiral salophen Co(III) penta-florobenzoate as catalyst and tetrabutyl ammonium bromide as co-catalyst. Journal of Macromolecular Science Part A-Pure and Applied Chemistry, Vol. 53 Iss. 5 pp. 297-300. [IF2015: 0.963 ]
  12. Manpreet Kaur, Surinder Singh, Rajeev Mehta (2016) A comparison of modifications induced by Li3+ and Ag8+ ion beams irradiation in poly(lactide-co-glycolide) films. Polymer Science - Series B, Vol. 58 Iss. 6 pp. 759-768. [IF2015: 0.621]
  13. Deepak Bhandari, Rahul Chhibber, Navneet Arora, Rajeev Mehta (2016) Investigations on weld metal chemistry and mechanical behaviour of bimetallic welds using CaO–CaF2–SiO2–Ni based electrode coatings. Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, Vol. 230 Iss. 6 pp. -. [IF2015: 1.625]
  14. Hamender Kumar Aggarwal, Rahul Chhibber, Navneet Arora, Rajeev Mehta (2016) Experimental Analysis of Thermal Fatigue in Bimetallic Welds. Material Science Forum, Vol. Iss. pp. 124-127
  15. Hamender Kumar Aggarwal, Rahul Chhibber, Navneet Arora, Rajeev Mehta (2016) Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions. Material Science Forum, Vol. Iss. pp. 41-44
  16. Deepak Bhandari, Rahul Chhibber, Navneet Arora, Rajeev Mehta (2016) Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds. Materials Science Forum, Vol. 880 Iss. pp. 37-40. [IF2015: 0.33]
  17. Bhandari D., Chhibber R., Arora N., Rajeev Mehta (2016) Investigation of TiO2-SiO2-CaO-CaF2 based electrode coatings on weld metal chemistry and mechanical behaviour of bimetallic welds. Journal of Manufacturing Processes, Vol. 23 Iss. pp. 61-74. [IF2015: 2.322 ]
  18. Garg M., Shruti Sharma, Rajeev Mehta (2016) Processing of Functionalized and Pristine Carbon Nanotube Epoxy Composites with Silane-Treated Glass Fiber. Materials and Manufacturing Processes, Vol. 31 Iss. 15 pp. 2044-2056. [IF2015: 2.274]
  19. Garg M., Shruti Sharma, Rajeev Mehta (2016) Carbon nanotube-reinforced glass fiber epoxy composite laminates exposed to hygrothermal conditioning. Journal of Materials Science, Vol. 51 Iss. 18 pp. 8562-8578. [IF2015: 2.599 ]
  20. Deepak Bhandari, Rahul Chhibber, Navneet Arora, Rajeev Mehta (2016) Investigation of TiO2-SiO2-CaO-CaF2 based electrode coatings on weld metal chemistry and mechanical behaviour of bimetallic welds. Journal of Manufacturing Processes, Vol. 23 Iss. August 2016 pp. 61-74. [IF2015: 2.322 ]
  21. Sharma B., Chhibber R., Rajeev Mehta (2016) Effect of surface treatment of nanoclay on the mechanical properties of epoxy/glass fiber/clay nanocomposites. Composite Interfaces, Vol. Iss. pp. 1-18. [IF2015: 1.083]
  22. Shilpa Narang, Rajeev Mehta, Dusan Berek, S.N.Upadhyay (2016) Effect of electron density on the catalysts for copolymerization of propylene oxide and CO2. Journal of Polymer Research, Vol. 23 Iss. 5 pp. 1-8. [IF2015: 1.615]
  23. Shilpa Narang, Rajeev Mehta, Dusan Berek, S.N. Upadhyay (2016) Copolymerization of Propylene Oxide and CO2 Using Achiral Salophen Co(III) Penta- florobenzoate as Catalyst and tetrabutyl ammonium bromide as Co-catalyst. Journal of Macromolecular Science Part A-Pure and Applied Chemistry, Vol. 53 Iss. 5 pp. 297-300. [IF2015: 0.963 ]
  24. Garg Mohit, Shruti Sharma, Sharma Sandeep, Rajeev Mehta (2016) Non-contact damage monitoring technique for FRP laminates using guided waves. Smart Structures and Systems, Vol. Iss. pp. -. [IF2015: 1.382]
  25. Manpreet Kaur, Surinder Singh, Rajeev Mehta (2016) Physico-Chemical Modification Induced in PLGA/OMMT Nanocomposite films by Li3+ Ion Beam. Vacuum, Vol. 125 Iss. pp. 170-179. [IF2015: 1.53]
  26. Shilpa Narang, Eva Macova, Dušan Berek, S. N. Upadhyay, Rajeev Mehta (2015) Synthesis of poly(propylene carbonate) from highly active, inexpensive achiral (Salph)Co(III)X as initiator and bis(triphenyl phosphine) iminium as co-initiator. Journal of Applied Polymer Science, Vol. 133 Iss. 12 pp. 43099 (10 pages)-. [IF2015: 1.86 ]
  27. Shilpa Narang, Rajeev Mehta, Du?an Berek, S.N.Upadhyay (2015) Copolymerization of Propylene Oxide and CO2Using Achiral Salophen Co(III) Penta- florobenzoate??as Catalyst and tetrabutyl ammonium bromide as Co-catalyst. Journal of Macromolecular Science Part A-Pure and Applied Chemistry, Vol. Iss. pp. -. [IF2015: 0.963 ]
  28. Pooja Puri, Rajeev Mehta, Sunita Rattan (2015) Synthesis of Conductive Polyurethane/Graphite Composites for Electromagnetic Interference Shielding. Journal of Electronic Materials, Vol. 44 Iss. 11 pp. 4255-4268. [IF2015: 1.579]
  29. Shilpa Narang, Rajeev Mehta, S.Nath Upadhyay (2015) Copolymerization of Propylene Oxide and Carbon Dioxide. Current Organic Chemistry, Vol. 19 Iss. 24 pp. 2344-2357. [IF2015: 1.924 ]
  30. Pooja Puri, Rajeev Mehta, S. Rattan (2015) Synergistic effects of clay and GNPs on electrical and mechanical properties of PU/GNP/OMMT ternary composite.. Journal of Optoelectronics and Advanced Materials, Vol. 17 Iss. 3 pp. 477-483. [IF2015: 0.449]
  31. Mohit Garg, Shruti Sharma, Rajeev Mehta (2015) Pristine and amino functionalized carbon nanotubes reinforced glass fiber epoxy composites. Composites Part A-Applied Science and Manufacturing, Vol. 76 Iss. pp. 92-101. [IF2015: 4.075]
  32. Kaur M., Singh S., Rajeev Mehta (2014) Silver ion beam irradiation effects on poly(lactide-co-glycolide) (PLGA)/clay nanocomposites. Applied Physics A-Materials Science & Processing, Vol. 117 Iss. 4 pp. 2241-2249. [IF2015: 1.455 ]
  33. Pankil Singla, Rajeev Mehta, S.N. Upadhyay (2014) Microwave assisted in situ ring-opening polymerization of polylactide/clay nanocomposites: Effect of clay loading. Applied Clay Science, Vol. 95 Iss. pp. 67-73. [IF2015: 3.101 ]
  34. Puri P., Rajeev Mehta, Rattan S. (2014) Synthesis and mechanical properties of polyurethane/clay nanocomposites. Journal of Optoelectronics and Advanced Materials, Vol. 16 Iss. 42286 pp. 1126-1130. [IF2015: 0.449]
  35. Kaur M., Singh S., Rajeev Mehta (2014) The Effect of O6+ and Si7+ ion beam irradiations on poly(lactide-co-glycolide) (50: 50) copolymer. Polymer Science - Series B, Vol. 56 Iss. 5 pp. 657-663. [IF2015: 0.621]
  36. Singla P., Rajeev Mehta, Berek D., Upadhyay S.N. (2014) Ring opening polymerization of lactide in a monomode microwave using stannous octoate and dibutyltin dimethoxide catalysts. Journal of Macromolecular Science Part A-Pure and Applied Chemistry, Vol. 51 Iss. 4 pp. 350-361. [IF2015: 0.963 ]
  37. Andhariya N., Upadhyay R., Rajeev Mehta, Bhupendrakumar Chudasama (2013) Folic acid conjugated magnetic drug delivery system for controlled release of doxorubicin. Journal of Nanoparticle Research, Vol. 15 Iss. 1 pp. -. [IF2015: 2.02 ]
  38. Narang S., Rajeev Mehta, Upadhyay S.N. (2013) Polyethylene glycol and montmorillonite clay anchored Schiff base ligand-metal complexes. Industrial and Engineering Chemistry Research, Vol. 52 Iss. 11 pp. 3967-3973
  39. Jain A., Vu T., Rajeev Mehta, Susheel Kumar Mittal (2013) Optimizing the cost and performance of parabolic trough solar plants with thermal energy storage in India. Environmental Progress & Sustainable Energy, Vol. 32 Iss. 3 pp. 824-829. [IF2015: 1.672]
  40. Jain A., Chalapathi Rao P.N.B.V., Choudhury P., Rajeev Mehta, Susheel Kumar Mittal (2013) Optimization studies for hybrid and storage designs for parabolic solar trough systems with the system advisor model. Environmental Progress & Sustainable Energy, Vol. 32 Iss. 4 pp. 1247-1254. [IF2015: 1.672]
  41. Pankil Singla, Rajeev Mehta, Siddh Nath Upadhyay (2012) Clay Modification by the use of Organic Cations . Green and Sustainable Chemistry, Vol. 2 Iss. 1 pp. 21-25
  42. B. Sharma, S. Mahajan, R. Chhibber, Rajeev Mehta (2012) Glass fiber reinforced polymer-clay nanocomposites: processing, structure And hygrothermal effects on mechanical properties. Procedia Chemistry, Vol. 4 Iss. 2012 pp. 39-46
  43. P. Singla, P. Kaur, Rajeev Mehta, D. Berek, S.N. Upadhyay (2012) Ring-Opening Polymerization of Lactide Using Microwave and Conventional Heating. Procedia Chemistry, Vol. 4 Iss. 2012 pp. 179-185
  44. Rajor A., Xaxa M., Rajeev Mehta, Kunal (2012) An overview on characterization, utilization and leachate analysis of biomedical waste incinerator ash. Journal of Environmental Management, Vol. 108 Iss. pp. 36-41. [IF2015: 4.01 ]
  45. Singla R., Rajeev Mehta (2012) Preparation and Characterization of Polylactic Acid-Based Biodegradable Blends Processed Under Microwave Radiation. Polymer-Plastics Technology and Engineering, Vol. 51 Iss. 10 pp. 1014-1017. [IF2015: 1.232 ]
  46. Singla P., Rajeev Mehta, Berek D., Upadhyay S.N. (2012) Microwave assisted synthesis of poly(lactic acid) and its characterization using size exclusion chromatography. Journal of Macromolecular Science Part A-Pure and Applied Chemistry, Vol. 49 Iss. 11 pp. 963-970. [IF2015: 0.963 ]
  47. Bikramjit Sharma, Rahul Chhibber, Rajeev Mehta (2011) Layered Silicates in Fibre-reinforced Composites. Research Bulletin of Australian Institute of High Energetic Materials, Vol. 1 Iss. pp. 106-118
  48. Jain A., Rajeev Mehta, Susheel Kumar Mittal (2011) Modeling impact of solar radiation on site selection for solar PV power plants in India. TAYLOR & FRANCIS INC, Vol. 8 Iss. 4 pp. 486-498. [IF2015: 1.454 ]
  49. Ranpreet Singh, Rajeev Mehta, Vineet Kumar (2011) Simultaneous removal of copper, nickel and zinc metal ions using bulk liquid membrane system. Desalination, Vol. 272 Iss. 42064 pp. 170-173. [IF2015: 5.527 ]
  50. Kaur P., Rajeev Mehta, Upadhyay S.N. (2011) Role of important parameters in ring opening polymerization of polylactide. Journal of Polymer Engineering, Vol. 31 Iss. 42065 pp. 243-249. [IF2015: 0.658]
  51. Rajeev Mehta, Kumar V., Upadhyay S.N. (2011) Kinetic parameters estimation of ring-opening poly(lactic acid) polymerization by modeling and simulation. Journal of Polymer Engineering, Vol. 31 Iss. 42065 pp. 251-252. [IF2015: 0.658]
  52. Kaur P., Rajeev Mehta, Berek D., Upadhyay S.N. (2011) Synthesis of polylactide: Effect of dispersion of the initiator. Journal of Macromolecular Science Part A-Pure and Applied Chemistry, Vol. 48 Iss. 10 pp. 840-845. [IF2015: 0.963 ]
  53. Rajeev Mehta, Kumar V., Upadhyay S.N. (2007) Mathematical modeling of the poly(lactic acid) ring-opening polymerization kinetics. Polymer-Plastics Technology and Engineering, Vol. 46 Iss. 3 pp. 257-264. [IF2015: 1.232 ]
  54. Rajeev Mehta, Kumar V., Upadhyay S.N. (2007) Mathematical modeling of the poly(lactic acid) ring-opening polymerization using stannous octoate as a catalyst. Polymer-Plastics Technology and Engineering, Vol. 46 Iss. 10 pp. 933-937. [IF2015: 1.232 ]
  55. Rajeev Mehta, Kumar V., Haripada Bhunia, Upadhyay S.N. (2005) Synthesis of poly(lactic acid): A review. Journal of Macromolecular Science - Polymer Reviews, Vol. 45 Iss. 4 pp. 325-349
  56. Rajeev Mehta, David P. Anderson, Joseph W. Hager (2003) G raphitic open-celled carbon foams: processing and characterization. Carbon, Vol. 41 Iss. pp. 2159-2179. [IF2015: 6.337]
  57. Rajeev Mehta, Anderson D.P., Hager J.W. (2003) Graphitic open-celled carbon foams: Processing and characterization. Carbon, Vol. 41 Iss. 11 pp. 2174-2176. [IF2015: 6.337]

Conference Publication(s):
  1. Manpreet Kaur, Surinder Singh, Rajeev Mehta (2015) The effects of swift heavy ion irradiation on the structural properties of poly(lactide-coglycolide)/clay nanocomposite. Proceedings of the DAE Solid State Physics Symposium, AIP Conference Proceedings [ : 21–25 December 2015], pp.-.