header

Publications@Thapar

Thapar University
Patiala, Punjab - 147004

Publication@Thapar

Publications@Thapar

2017 (13) 2016 (12) 2015 (10) 2014 (4) 2013 (1)
All

Journal(s) :

  1. Singh S., Gupta D., Jain V. (2017). Processing of Ni-WC-8Co MMC casting through microwave melting. Materials and Manufacturing Processes, (), 1-9. Google Citation
  2. Singh K., Nanda T., Rajeev Mehta (2017). Processing of polyethylene terephthalate fiber reinforcement to improve compatibility with constituents of GFRP nanocomposites. Materials and Manufacturing Processes, (), 1-9. Google Citation
  3. Singh G., Singh A.K., Garg P. (2017). Development of magnetorheological finishing process for external cylindrical surfaces. Materials and Manufacturing Processes, 32 (5), 581-588. Google Citation
  4. Singh V., Adhikary M., Venugopalan T., Chakraborty A., Nanda T., Kumar B.R. (2017). Role of recrystallization and pearlite dissolution in industrial processing of DP590 steels. Materials and Manufacturing Processes, (), 1-11. Google Citation
  5. Singh M., Singh A., Singh A.K. (2017). A rotating core-based magnetorheological nano-finishing process for external cylindrical surfaces. Materials and Manufacturing Processes, (), 1-9. Google Citation
  6. Bedi T.S., Singh A.K. (2017). Magnetorheological finishing of ferromagnetic blind-hole type surfaces. Materials and Manufacturing Processes, (), 1-8. Google Citation
  7. Maan S., Singh G., Singh A.K. (2017). Nano-surface-finishing of permanent mold punch using magnetorheological fluid-based finishing processes. Materials and Manufacturing Processes, 32 (9), 1004-1010. Google Citation
  8. Grover V., Singh A.K. (2017). Improved magnetorheological honing process for nanofinishing of variable cylindrical internal surfaces. Materials and Manufacturing Processes, (), 1-11. Google Citation
  9. Karanbir Singh, Tarun Nanda, Rajeev Mehta (2017). Processing of poly-ethylene terephthalate fiber reinforcement to improve compatibility with constituents of GFRP nanocomposites . Materials and Manufacturing Processes, (), -. [IF(2015) : 2.274] . Google Citation
  10. Grover V., Singh A.K. (2017). A novel magnetorheological honing process for nano-finishing of variable cylindrical internal surfaces. Materials and Manufacturing Processes, (), 1-8. [IF(2015) : 2.274] . Google Citation
  11. Mittal M., Tarun Nanda, Kumar B.R., Singh V. (2017). Effect of inter-critical annealing parameters on ferrite recrystallization and austenite formation in DP 590 steel. Materials and Manufacturing Processes, (), 1-8. [IF(2015) : 2.274] . Google Citation
  12. Bedi T.S., Singh A.K. (2017). A new magnetorheological finishing process for ferromagnetic cylindrical honed surfaces. Materials and Manufacturing Processes, (), 1-9. [IF(2015) : 2.274] . Google Citation
  13. Nanda T., Kumar B.R., Sharma S., Singh V., OP Pandey (2017). Effect of thermal cycling process parameters on recrystallization kinetics for processing of fine-grained pure copper. Materials and Manufacturing Processes, 32 (1), 34-43. [IF(2015) : 2.274] . Google Citation
  14. Mayank Mittal, Tarun Nanda, B. Ravi Kumar, and Vishal Singh (2016). Effect of inter- critical annealing parameters on ferrite recrystallization and austenite formation in DP 590 steel . Materials and Manufacturing Processes, (), -. [IF(2015) : 2.274] . Google Citation
  15. Surinder Singh, Tarun Nanda, B. Ravi Kumar, Vishal Singh (2016). Controlled Phase Transformation Simulations to Design Microstructure for Tailored Mechanical Properties in Steel . Materials and Manufacturing Processes, 31 (15), 2064-2075. [IF(2015) : 2.274] . Google Citation
  16. Tarun Nanda, B. Ravi Kumar, Sailaja Sharma, Vishal Singh, & O.P. Pandey (2016). Effect of Thermal Cycling Process Parameters on Recrystallization Kinetics for Processing of Fine Grained Pure Copper. Materials and Manufacturing Processes, 32 (1), 34-43. [IF(2015) : 2.274] . Google Citation
  17. Tarun Nanda, B. Ravi Kumar, Jasdeep (2016). Effect of isothermal annealing on microstructural morphology of martensite in a super martensitic stainless steel subjected to different prior conditions. Materials and Manufacturing Processes, 31 (8), 995-1003. [IF(2015) : 2.274] . Google Citation
  18. Maan S., Singh G., Singh A.K. (2016). Nano-surface-finishing of permanent mold punch using magnetorheological fluid-based finishing processes. Materials and Manufacturing Processes, (), 1-7. [IF(2015) : 2.274] . Google Citation
  19. Singh G., Singh A.K., Garg P. (2016). Development of magnetorheological finishing process for external cylindrical surfaces. Materials and Manufacturing Processes, (), 1-8. [IF(2015) : 2.274] . Google Citation
  20. Garg M., Shruti Sharma, Rajeev Mehta (2016). Processing of Functionalized and Pristine Carbon Nanotube Epoxy Composites with Silane-Treated Glass Fiber. Materials and Manufacturing Processes, 31 (15), 2044-2056. [IF(2015) : 2.274] . Google Citation
  21. Mahajan M., Kulvir Singh, OP Pandey (2016). Structural Investigation of Catalytically Grown Carbon Nanotubes. Materials and Manufacturing Processes, (), 1-6. [IF(2015) : 2.274] . Google Citation
  22. Anirban Bhattacharya, Ramesh Kumar (2016). Dissimilar joining between austenitic and duplex stainless steel in double-shielded GMAW: A comparative study. Materials and Manufacturing Processes, 31 (3), 300-310. [IF(2015) : 2.274] . Google Citation
  23. Anirban Bhattacharya (2016). Revisiting arc, metal flow behavior in flux activated tungsten inert gas welding. Materials and Manufacturing Processes, 31 (3), 343-351. [IF(2015) : 2.274] . Google Citation
  24. Surinder Tathgir, Anirban Bhattacharya (2016). Activated-TIG welding of different steels: Influence of various flux and shielding gas. Materials and Manufacturing Processes, 31 (3), 335-342. [IF(2015) : 2.274] . Google Citation
  25. Ashu Garg, Anirban Bhattacharya, Ajay Batish (2016). On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment. Materials and Manufacturing Processes, 31 (4), 522-529. [IF(2015) : 2.274] . Google Citation
  26. Bhattacharya A. (2015). Revisiting Arc, Metal Flow Behavior in Flux Activated Tungsten Inert Gas Welding. Materials and Manufacturing Processes, (), -9. [IF(2015) : 2.274] . Google Citation
  27. Bhattacharya A., Kumar R. (2015). Dissimilar Joining Between Austenitic and Duplex Stainless Steel in Double-Shielded GMAW: A Comparative Study. Materials and Manufacturing Processes, (), -11. [IF(2015) : 2.274] . Google Citation
  28. Singh, A.K., Jha, S., Pandey, P.M. (2015). Performance analysis of ball end magnetorheological finishing process with MR polishing fluid. Materials and Manufacturing Processes, 30 (12), 1482-1489. [IF(2015) : 2.274] . Google Citation
  29. Singh, S., Gupta, D., Jain, V., Sharma, A.K. (2015). Microwave processing of materials and applications in manufacturing industries: A Review. Materials and Manufacturing Processes, 30 (1), 1-29. [IF(2015) : 2.274] . Google Citation
  30. Tarun Nanda, Kumar B.R., Bhinder J. (2015). Effect of Isothermal Annealing on Microstructural Morphology of Martensite in a Super-Martensitic Stainless Steel Subjected to Different Prior Conditions. Materials and Manufacturing Processes, (), -. [IF(2015) : 2.274] . Google Citation
  31. Kumar D., Kulvir Singh (2015). Effect of Processing Methods and Die Design Parameters on Green Properties of WC–Co Nanopowder Pellets. Materials and Manufacturing Processes, (), -. [IF(2015) : 2.274] . Google Citation
  32. Anirban Bhattacharya, Bera T.K., Thakur A. (2015). On cutter deflection profile errors in end milling: Modeling and experimental validation. Materials and Manufacturing Processes, 30 (8), 1042-1050. [IF(2015) : 2.274] . Google Citation
  33. Tathgir S., Anirban Bhattacharya, Bera T.K. (2015). Influence of current and shielding gas in TiO2 flux activated tig welding on different graded steels. Materials and Manufacturing Processes, 30 (9), 1115-1123. [IF(2015) : 2.274] . Google Citation
  34. Sushil M., Vinod Kumar, Harmesh K. (2015). Experimental Investigation and Optimization of Process Parameters of Al/SiC MMCs Finished by Abrasive Flow Machining. Materials and Manufacturing Processes, 30 (7), 902-911. [IF(2015) : 2.274] . Google Citation
  35. Kumar R., Anirban Bhattacharya, Bera T.K. (2015). Mechanical and metallurgical studies in double shielded GMAW of dissimilar stainless steels. Materials and Manufacturing Processes, 30 (9), 1146-1153. [IF(2015) : 2.274] . Google Citation
  36. A. Bhattacharya, Tarun Kumar Bera, V.K. Suri (2014). Influence of Heat Input in Automatic GMAW: Penetration Prediction and Microstructural Observation. Materials and Manufacturing Processes, 29 (10), 1210-1218. [IF(2015) : 2.274] . Google Citation
  37. Gupta A., Ramagopal S.V., Ajay Batish, Anirban Bhattacharya (2014). Surface roughness and profile error in precision diamond turning of C18000. Materials and Manufacturing Processes, 29 (5), 606-613. [IF(2015) : 2.274] . Google Citation
  38. Sidhu S.S., Ajay Batish, Kumar S. (2014). Study of surface properties in particulate-reinforced metal matrix composites (MMCs) using powder-mixed electrical discharge machining (EDM). Materials and Manufacturing Processes, 29 (1), 46-52. [IF(2015) : 2.274] . Google Citation
  39. Anirban Bhattacharya, Tarun Kumar Bera (2014). Development of automatic GMAW setup for process improvements: Experimental and modeling approach. Materials and Manufacturing Processes, 29 (8), 988-995. [IF(2015) : 2.274] . Google Citation
  40. Sidhu S.S., Ajay Batish, Kumar S. (2013). EDM of metal matrix composite for parameter design using lexicographic goal programming. Materials and Manufacturing Processes, 28 (4), 495-500. [IF(2015) : 2.274] . Google Citation