header

Publications@Thapar

Thapar University
Patiala, Punjab - 147004

Publication@Thapar

Publications@Thapar

2017 (3) 2016 (7) 2015 (19) 2014 (4) 2013 (2)
2011 (1) All

Journal(s) :

  1. Grover V., Singh A.K. (2017). Analysis of particles in magnetorheological polishing fluid for finishing of ferromagnetic cylindrical workpiece. Particulate Science and Technology, (), 1-9. Google Citation
  2. Kundan L., Mallick S.S., Bonamali Pal (2017). Prediction and optimization of nanoclusters-based thermal conductivity of nanofluids: Application of Box?Behnken design (BBD). Particulate Science and Technology, 35 (3), 265-276. Google Citation
  3. Vishnoi N., Saroj Kumar Mohapatra (2017). Study of particle size distribution of pulverized coals in utility boilers. Particulate Science and Technology, (), 1-7. Google Citation
  4. Kundan L., Mallick S.S., Pal B. (2016). Prediction and optimization of nanoclusters-based thermal conductivity of nanofluids: Application of Box?Behnken design (BBD). Particulate Science and Technology, (), 1-12. [IF(2015) : 0.784] . Google Citation
  5. Prakash R., Rather R.A., Kaur M., Pal B. (2016). Oxidative degradation of aliphatic carboxylic acids by photocatalysis with bare and Ag-loaded TiO2 under UV light irradiation. Particulate Science and Technology, (), 1-5. [IF(2015) : 0.784] . Google Citation
  6. Bedi T.S., Singh A.K. (2016). Magnetorheological methods for nanofinishing ? a review. Particulate Science and Technology, 34 (4), 412-422. [IF(2015) : 0.784] . Google Citation
  7. Sandhu H., Gangacharyulu Dasaroju (2016). An experimental study on stability and some thermophysical properties of multiwalled carbon nanotubes with water?ethylene glycol mixtures. Particulate Science and Technology, (), 1-8. [IF(2015) : 0.784] . Google Citation
  8. Sharma N., Khanna R., Singh G., Kumar V. (2016). Fabrication of 6061 aluminum alloy reinforced with Si3N4/n-Gr and its wear performance optimization using integrated RSM-GA. Particulate Science and Technology, (), 1-11. [IF(2015) : 0.784] . Google Citation
  9. Sandhu H., Gangacharyulu Dasaroju, Agrawal V.P. (2016). Coding, evaluation, comparison, ranking and optimal selection of nanoparticles with heat transfer fluids for thermal systems. Particulate Science and Technology, (), 1-11. [IF(2015) : 0.784] . Google Citation
  10. Anu Mittal, Mallick S.S., Wypych P.W. (2016). An investigation into the transition of flow mechanism during fluidized dense-phase pneumatic conveying of fine powders. Particulate Science and Technology, 34 (1), 23-32. [IF(2015) : 0.784] . Google Citation
  11. Harjinder Singh, O. P. Pandey (2015). Effect of extended milling of scheelite ore with activated charcoal on direct synthesis of nanotungsten carbide. Particulate Science and Technology, 33 (6), 587-592. [IF(2015) : 0.784] . Google Citation
  12. Ruchika Thakur, Raj Kumar Gupta, Sanghamitra Barman (2015). Optimization of process parameters for transalkylation of toluene to xylene using response surface methodology. Particulate Science and Technology, (), -. [IF(2015) : 0.784] . Google Citation
  13. Singh H., OP Pandey (2015). Effect of Extended Milling of Scheelite Ore with Activated Charcoal on Direct Synthesis of Nanotungsten Carbide. Particulate Science and Technology, (), -. [IF(2015) : 0.784] . Google Citation
  14. Gourav Singla, Kulvir Singh, OP Pandey (2015). Effect of processing variables on WC nanoparticles synthesized by solvothermal route. Particulate Science and Technology, 33 (1), 47-52. [IF(2015) : 0.784] . Google Citation
  15. Bhatt G., Ajay Batish, Bhattacharya A. (2015). Experimental investigation of magnetic field assisted powder mixed electric discharge machining. Particulate Science and Technology, 33 (3), 246-256. [IF(2015) : 0.784] . Google Citation
  16. Sharma A., Kumar S., Singh G., OP Pandey (2015). Effect of particle size on wear behavior of al-garnet composites. Particulate Science and Technology, 33 (3), 234-239. [IF(2015) : 0.784] . Google Citation
  17. Bhupender Pal , Bhupender Pal (2015). Influence of CuO nanostructures on the thermal conductivity of di water and ethylene glycol based nanofluids. Particulate Science and Technology, 33 (3), 224-228. [IF(2015) : 0.784] . Google Citation
  18. Arora R., Kumar S., Singh G., OP Pandey (2015). Role of different range of particle size on wear characteristics of al-rutile composites. Particulate Science and Technology, 33 (3), 229-233. [IF(2015) : 0.784] . Google Citation
  19. Singh R., Bonamali Pal (2015). Influence of Au photodeposition and doping in CdS nanorods: Optical and photocatalytic study. Particulate Science and Technology, 33 (1), 53-58. [IF(2015) : 0.784] . Google Citation
  20. Mittal, A., Setia, G., S.S. Mallick, S.S., Wypych, P.W. (2015). An investigation into pressure fluctuations and improved modeling of solids friction for dense-phase pneumatic conveying of powders. Particulate Science and Technology, 33 (1), 67-75. [IF(2015) : 0.784] . Google Citation
  21. Mallick, S.S. (2015). Preface. Particulate Science and Technology, 33 (1), 1-. [IF(2015) : 0.784] . Google Citation
  22. Grover I.S., Satnam Singh, Bonamali Pal (2015). Influence of thermal treatment and FE-loading on morphology, crystal structure, and photocatalytic activity of sodium titanate nanotubes. Particulate Science and Technology, 33 (2), 132-138. [IF(2015) : 0.784] . Google Citation
  23. Thakur S., OP Pandey, Kulvir Singh (2015). Structural, thermal, and electrical study of Bi 0.5Sr 0.5MnO 3. Particulate Science and Technology, 33 (2), 178-183. [IF(2015) : 0.784] . Google Citation
  24. Kapil Sood, Kulvir Singh, OP Pandey (2015). Structural, conductivity, and dielectric relaxation studies of La0.9Ba0.1GaO 3-δsystem. Particulate Science and Technology, 33 (2), 113-118. [IF(2015) : 0.784] . Google Citation
  25. Jha P.K., OP Pandey, Kulvir Singh (2015). Crystallization and glass transition kinetics of Na2s-P2s5-based super-ionic glasses. Particulate Science and Technology, 33 (2), 166-171. [IF(2015) : 0.784] . Google Citation
  26. Bonamali Pal, Kaur R. (2015). Facile synthesis of anisotropic au nanostructures by laser irradiation and study of their optical and electrokinetic properties. Particulate Science and Technology, 33 (2), 139-144. [IF(2015) : 0.784] . Google Citation
  27. Ajay Batish, Anirban Bhattacharya, Neeraj Kumar (2015). Powder mixed dielectric: An approach for improved process performance in EDM. Particulate Science and Technology, 33 (2), 150-158. [IF(2015) : 0.784] . Google Citation
  28. Kaur J., Sharma M., OP Pandey (2015). Effect of pH on Size of ZnS Nanoparticles and Its Application for Dye Degradation. Particulate Science and Technology, 33 (2), 184-188. [IF(2015) : 0.784] . Google Citation
  29. Monga A., Bonamali Pal (2015). Enhanced stability, conductance, and catalytic activity of gold nanoparticles via oxidative dissolution by KMnO 4. Particulate Science and Technology, 33 (2), 159-165. [IF(2015) : 0.784] . Google Citation
  30. Satish Kumar, B.K. Gandhi, Saroj Kumar Mohapatra (2014). Performance Characteristics of Centrifugal Slurry Pump with Multi-Sized Particulate Bottom and Fly Ash Mixtures. Particulate Science and Technology, 32 (), 466-476. [IF(2015) : 0.784] . Google Citation
  31. Rajinder Kaur, Dinesh Goyal (2014). Mineralogical studies of coal flyash for soil application in agriculture. Particulate Science and Technology, 33 (1), 76-80. [IF(2015) : 0.784] . Google Citation
  32. Arya D., Gupta R.K. (2014). Simulation studies on variable cluster size in FCC riser reactor. Particulate Science and Technology, 32 (2), 144-150. [IF(2015) : 0.784] . Google Citation
  33. Mishra A., Kundan L., Mallick S.S. (2014). Modeling thermal conductivity for alumina-water nanofluids. Particulate Science and Technology, 32 (3), 319-326. [IF(2015) : 0.784] . Google Citation
  34. Bansal A., Mallick S.S., Wypych P.W. (2013). Investigating straight-pipe pneumatic conveying characteristics for fluidized dense-phase pneumatic conveying. Particulate Science and Technology, 31 (4), 348-356. [IF(2015) : 0.784] . Google Citation
  35. Mallick S.S., Wypych P.W., Pan R. (2013). Modeling dense-phase pneumatic conveying of powders using suspension density. Particulate Science and Technology, 31 (4), 340-347. [IF(2015) : 0.784] . Google Citation
  36. Mallick S.S., Wypych P.W. (2011). On improving scale-up procedures for dense-phase pneumatic conveying of powders. Particulate Science and Technology, 29 (5), 407-427. [IF(2015) : 0.784] . Google Citation